ip_connectivity
Differences
This shows you the differences between two versions of the page.
| Next revision Both sides next revision | |||
|
ip_connectivity [2022/01/26 21:22] richard created |
ip_connectivity [2022/01/26 21:23] richard [25% 3.0 IP Connectivity] |
||
|---|---|---|---|
| Line 3: | Line 3: | ||
| - | 3.1 Interpret the components of routing table | + | 3.1 Interpret the components of routing table \\ |
| - | 3.1.a Routing protocol code | + | 3.1.a Routing protocol code \\ |
| - | 3.1.b Prefix | + | 3.1.b Prefix \\ |
| - | 3.1.c Network mask | + | 3.1.c Network mask \\ |
| - | 3.1.d Next hop | + | 3.1.d Next hop \\ |
| - | 3.1.e Administrative distance | + | 3.1.e Administrative distance \\ |
| - | 3.1.f Metric | + | 3.1.f Metric \\ |
| - | 3.1.g Gateway of last resort | + | 3.1.g Gateway of last resort \\ |
| - | + | \\ | |
| - | 3.2 Determine how a router makes a forwarding decision by default | + | 3.2 Determine how a router makes a forwarding decision by default \\ |
| - | 3.2.a Longest match | + | 3.2.a Longest match \\ |
| - | 3.2.b Administrative distance | + | 3.2.b Administrative distance \\ |
| - | 3.2.c Routing protocol metric | + | 3.2.c Routing protocol metric \\ |
| - | + | \\ | |
| - | 3.3 Configure and verify IPv4 and IPv6 static routing | + | 3.3 Configure and verify IPv4 and IPv6 static routing \\ |
| - | 3.3.a Default route | + | 3.3.a Default route \\ |
| - | 3.3.b Network route | + | 3.3.b Network route \\ |
| - | 3.3.c Host route | + | 3.3.c Host route \\ |
| - | 3.3.d Floating static | + | 3.3.d Floating static \\ |
| - | + | \\ | |
| - | 3.4 Configure and verify single area OSPFv2 | + | 3.4 Configure and verify single area OSPFv2 \\ |
| - | 3.4.a Neighbor adjacencies | + | 3.4.a Neighbor adjacencies \\ |
| - | 3.4.b Point-to-point | + | 3.4.b Point-to-point \\ |
| - | 3.4.c Broadcast (DR/BDR selection) | + | 3.4.c Broadcast (DR/BDR selection) \\ |
| - | 3.4.d Router ID | + | 3.4.d Router ID \\ |
| - | + | \\ | |
| - | 3.5 Describe the purpose of first hop redundancy protocol | + | 3.5 Describe the purpose of first hop redundancy protocol \\ |
ip_connectivity.txt · Last modified: 2022/01/27 13:45 by richard
Page Tools
