This shows you the differences between two versions of the page.
Next revision | Previous revision Last revision Both sides next revision | ||
ip_connectivity [2022/01/26 21:22] richard created |
ip_connectivity [2022/01/26 21:35] richard |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== 25% 3.0 IP Connectivity ====== | + | ====== 3.0 IP Connectivity (25%) ====== |
- | 3.1 Interpret the components of routing table | + | 3.1 Interpret the components of routing table \\ |
- | 3.1.a Routing protocol code | + | 3.1.a Routing protocol code \\ |
- | 3.1.b Prefix | + | 3.1.b Prefix \\ |
- | 3.1.c Network mask | + | 3.1.c Network mask \\ |
- | 3.1.d Next hop | + | 3.1.d Next hop \\ |
- | 3.1.e Administrative distance | + | 3.1.e Administrative distance \\ |
- | 3.1.f Metric | + | 3.1.f Metric \\ |
- | 3.1.g Gateway of last resort | + | 3.1.g Gateway of last resort \\ |
- | + | \\ | |
- | 3.2 Determine how a router makes a forwarding decision by default | + | 3.2 Determine how a router makes a forwarding decision by default \\ |
- | 3.2.a Longest match | + | 3.2.a Longest match \\ |
- | 3.2.b Administrative distance | + | 3.2.b Administrative distance \\ |
- | 3.2.c Routing protocol metric | + | 3.2.c Routing protocol metric \\ |
- | + | \\ | |
- | 3.3 Configure and verify IPv4 and IPv6 static routing | + | 3.3 Configure and verify IPv4 and IPv6 static routing \\ |
- | 3.3.a Default route | + | 3.3.a Default route \\ |
- | 3.3.b Network route | + | 3.3.b Network route \\ |
- | 3.3.c Host route | + | 3.3.c Host route \\ |
- | 3.3.d Floating static | + | 3.3.d Floating static \\ |
- | + | \\ | |
- | 3.4 Configure and verify single area OSPFv2 | + | 3.4 Configure and verify single area OSPFv2 \\ |
- | 3.4.a Neighbor adjacencies | + | 3.4.a Neighbor adjacencies \\ |
- | 3.4.b Point-to-point | + | 3.4.b Point-to-point \\ |
- | 3.4.c Broadcast (DR/BDR selection) | + | 3.4.c Broadcast (DR/BDR selection) \\ |
- | 3.4.d Router ID | + | 3.4.d Router ID \\ |
- | + | \\ | |
- | 3.5 Describe the purpose of first hop redundancy protocol | + | 3.5 Describe the purpose of first hop redundancy protocol \\ |